Frequently asked questions about natural latex mattresses, pillows and other latex products, from the basics to choosing, care, standards, OEM manufacturing and export. Answered by the team at Latex Systems Public Company Limited, a manufacturer of 100% natural latex bedding in Chachoengsao, Thailand.

What is natural latex?

What is natural latex?

Natural latex comes from the sap of the rubber tree (Hevea brasiliensis). The liquid latex is whipped into foam and baked in moulds to make mattresses, pillows and toppers. Synthetic latex, by contrast, is made from petrochemicals.

How is natural latex different from synthetic latex?

Natural latex comes from rubber-tree sap and has high elasticity and fast recovery. Synthetic latex (such as SBR) is made from petroleum. Some manufacturers blend the two, so check the material ratio stated on the product or its certificate.

What kind of latex does Latex Systems use?

Latex Systems makes mattresses, pillows and other products from 100% natural latex at the company’s own factory in Chachoengsao, Thailand.

Why is Thailand a key source of latex mattresses?

Thailand is the world’s largest producer of natural rubber, so Thai factories can source fresh latex close to the plantations and spend less time transporting raw material.

How is a latex mattress made?

Concentrated latex is whipped into foam, poured into a mould and baked until it sets, then washed and dried before quality inspection and covering. See each step on the production process page.

Materials and properties

How can I tell if a latex mattress is genuine?

Genuine latex has small pores throughout, a matte surface, springs back quickly when pressed and can be folded without cracking. The most reliable check is a third-party test report or certificate that names the same manufacturer and model.

Why does a latex mattress have holes all over it?

The holes are left by heat-conducting pins in the mould during curing. They help the latex cure evenly through the whole block and improve airflow in use.

Does a latex mattress have a smell?

Natural latex has a mild rubber smell, which is normal and not a chemical odour. Place it in a well-ventilated room and the smell fades over time.

Why isn’t every latex mattress the same colour?

Natural latex ranges from creamy white to light yellow and varies by latex batch. Colour alone does not indicate quality or authenticity.

Does a latex mattress sleep hot?

Latex has an open-cell structure with ventilation holes, so it retains less heat than dense foams such as memory foam. How warm it feels also depends on the cover and sheets you use.

Is a latex mattress heavy?

Fairly heavy, because latex is denser than ordinary foam. Actual weight depends on size and thickness; ask our sales team for the weight of each model.

Does a latex mattress make noise when you turn over?

No. There are no springs or metal frame to squeak, because it is one solid piece of latex.

Is latex flammable?

Latex is a flammable material. Keep it away from heaters and candles, and do not use it with an electric blanket.

Does a latex mattress help with dust mites?

Solid latex is a harder place for dust mites to live than fibre-filled materials, but covers and sheets can still collect dust, so wash them regularly.

Can people with a latex allergy use it?

People allergic to natural rubber proteins should consult a doctor before use, even though the cover keeps skin from touching the latex directly.

Does a latex mattress sag?

Latex recovers well, so it rarely forms permanent dips like foam or springs. Long-term softening depends on the firmness chosen, the user’s weight and care.

Choosing the right product

What is the difference between Mono and 7-zone latex mattresses?

A Mono mattress has the same firmness throughout. A 7-zone mattress varies firmness along the body, letting the shoulders sink more while giving the hips more support. Latex Systems makes both.

Which firmness should I choose?

Latex Systems offers four levels: soft, medium, firm and extra firm. Heavier people and back sleepers usually suit a firmer mattress, while side sleepers usually suit medium.

How thick should a latex mattress be?

Latex Systems produces thicknesses from 2.5 to 20 cm. 2.5–5 cm works as a topper on an existing mattress; 10–20 cm works as a main mattress or on the floor.

What sizes are available?

Standard sizes are 3.5 ft (single), 5 ft (queen) and 6 ft (king), and custom sizes can be made to order. Contact our sales team for details.

Which latex mattress is best for back pain?

Choose one that keeps your spine straight while you sleep, usually medium to firm. If you have chronic pain or recent surgery, consult a doctor first. (Further reading in Thai)

What suits side sleepers?

Side sleepers need the shoulders and hips to sink enough to keep the spine straight, so medium firmness or a 7-zone mattress is usually a better fit.

What suits elderly users?

A firmer mattress makes it easier to sit up and change position. Choose a combined bed and mattress height that lets the feet rest flat on the floor when sitting.

Can young children use a latex mattress?

Yes. Babies should sleep on a flat, firm surface that does not sink, without pillows or thick blankets in the bed. Follow your paediatrician’s advice.

How should two sleepers with very different weights choose?

Latex transfers little motion to the person next to you. If your weights differ a lot, ask our sales team about firmness options or a split-firmness build.

What is the difference between a topper and a latex mattress?

A topper is a thin latex layer (about 2.5–5 cm) placed on an existing mattress to change its feel. A latex mattress 10 cm or thicker can be used as the main mattress.

Can a latex topper fix a sagging mattress?

No. A topper follows the dips of the mattress underneath. Toppers suit mattresses that are too hard but still flat.

Can I put a latex mattress on the floor?

Yes. Choose 10 cm or thicker and lift it to air out from time to time, because a floor releases moisture less well than a bed base.

Can I use a latex mattress on a slatted bed?

Yes, as long as the gaps between slats are not too wide. We recommend no more than about 5 cm so the latex does not sink into the gaps and deform.

How is latex different from memory foam?

Latex is bouncy and recovers quickly, while memory foam sinks slowly and recovers slowly, so changing position is easier on latex.

How is latex different from a spring mattress?

Springs pass more motion to the person beside you. Latex absorbs motion better and has no spring noise.

How is latex different from ordinary foam?

Latex is more elastic and recovers better than foam. Foam is cheaper but tends to form dips sooner with long use.

How do I choose a latex pillow?

A contour pillow has two sides of different heights: the lower side suits back sleeping and the higher side suits side sleeping. Choose one that keeps your head and neck in line with your spine.

Care and maintenance

Can I put a latex mattress in the sun?

No. UV light makes latex harden, become brittle and crumble. Air it in a shaded, breezy place.

How do I clean a latex mattress?

The cover can be removed and washed, but never wash the latex core. Spot-clean with a cloth dampened in mild soapy water, then air-dry completely.

What should I do if liquid spills on it?

Blot up as much liquid as possible, wipe with mild soapy water, then dry completely with a fan. Do not use a hair dryer or high heat.

Can I wash a latex pillow?

Only the pillowcase is washable. Spot-clean the latex pillow itself and air it in the shade. Do not wring, tumble-dry or put it in the sun.

Do I need to flip a latex mattress?

No need to flip it, but rotating it head-to-foot every 6 months helps it wear evenly.

Should I use a mattress protector?

Yes. A protector stops sweat and stains from soaking into the latex, which extends its life.

Can I use an electric blanket on a latex mattress?

Not recommended. Accumulated heat ages latex faster, and latex is flammable.

How do I store a latex mattress I’m not using?

Store it in a shaded, dry, ventilated place, wrapped in breathable fabric or a breathable bag, and avoid leaving heavy items on it for long periods.

Can I use a latex mattress with pets?

Yes, but pet claws can tear the latex, so cover it with a sheet or a thick protector.

How long does a latex mattress last?

It depends on use and care. It typically lasts more than 10 years when kept out of the sun and used with a protector.

Standards and safety

What certifications does Latex Systems hold?

ISO 9001:2015, eco INSTITUT, TÜV Rheinland LGA and Thailand Trust Mark, all currently valid.

Do Latex Systems mattresses contain radon?

Our products have been tested for radon by RN Tech Co., Ltd., a radon specialist from South Korea. (Details in Thai)

Where does Latex Systems manufacture?

At the company’s factory, 79/2 Moo 1, Hom Sin, Bang Pakong, Chachoengsao 24180, Thailand.

How does the EUDR affect latex products?

The EUDR is a European Union regulation requiring natural-rubber products sold in the EU to be proven free from deforestation, so exporters must be able to trace where their rubber comes from. (More on EUDR in Thai)

Orders and manufacturing

Where can I see the products in person?

We have a showroom where you can see and try products before deciding. Please book an appointment with our sales team in advance by phone at +66 38 570 201-4 or via LINE.

Can you make custom sizes?

Yes. Contact our sales team directly with the size, thickness and firmness you need.

Do you offer OEM or private-label manufacturing?

Yes, we manufacture OEM and under the customer’s own brand. Contact our sales team about specifications, quantities and lead times.

Do you export overseas?

Yes. Latex Systems manufactures and exports to many countries. International customers can contact our export sales team at exportsales@latexsystems.com.

Can I get a tax invoice?

Yes. Give your name and invoicing address to our sales team when you order.

How do I request a quotation?

Fill in the form on our contact page or call +66 38 570 201-4. Domestic customers in Thailand can email domesticsales@latexsystems.com.

Is Latex Systems a public company?

Yes. The legal name is Latex Systems Public Company Limited (บริษัท เลเท็กซ์ ซิสเทมส์ จำกัด (มหาชน)), registration no. 0107561000358. The company was converted from Latex Systems Co., Ltd. (former registration no. 0105546067101). Both names refer to the same company and the same factory in Bang Pakong, Chachoengsao, Thailand. See our company history on the About us page.

Still have questions?

Our sales team can advise on choosing products, custom orders and OEM.